Details of Nats car

Aussie Wing Car Racing General Discussion, Information & Results.
Post Reply
lindsayb
Posts: 117
Joined: Thu Mar 19, 2009 9:34 pm

Details of Nats car

Post by lindsayb »

For those who may be interested. Car for Nats

Chassis Koford 414L - Standard length, 1 small bit of lead on the nose

Body Alpha Nissan - 143 long, 30 High, 5 thou + sticker rear wing, 2 pieces of 5 thou to stiffen front wings, one L piece inside , 1 by 1 inch square on outside

Gearing 8 - 38 - Gears Fox spur

1 motor qual, semi and final. Kford can and endbell - Koford 480 64 arm - 20 deg timing
Wrightway mags 22 segment, hole 502.

Tyres Alpha big hub - drilled medium
User avatar
David R
Posts: 44
Joined: Mon Feb 02, 2009 9:13 pm
Location: Quakers Hill Sydney

Re: Details of Nats car

Post by David R »

Lindsay ,,,,, horizonal brush hoods or vertical bruch hoods ?
lindsayb
Posts: 117
Joined: Thu Mar 19, 2009 9:34 pm

Re: Details of Nats car

Post by lindsayb »

vertical - Proslot golddust. Still has a lot of brush left - could probably run the same race again.
ozproducts
Posts: 260
Joined: Wed Feb 04, 2009 6:24 pm

Re: Details of Nats car for 2010 ( Rocky )

Post by ozproducts »

Hey Lindsay would you be able to pass on your info from the nats in rocky

kid kaos
lindsayb
Posts: 117
Joined: Thu Mar 19, 2009 9:34 pm

Re: Details of Nats car

Post by lindsayb »

Rocky - that was a long time ago.

Chassis 414Z standard length - brass weights on front of chassis
Motor - 490 84.5 - 3 off for final koford can and endbell - 24 mag
gears 8 39
tyres B52 - Alpha mediums red
Body Fox head narrow 30 high - 138 long
Post Reply